The southern coast of my country is an area with a high incidence of typhoons. Therefore, installing solar street lights on both sides of urban roads requires special attention to solar street lights with high wind and waterproof ratings. Some time ago, the fourth typhoon "Hagupit" made landfall from Zhejiang this year. When it landed, the maximum wind level in the center reached level 13.
After a typhoon, we often see some trees broken or even overturned by the typhoon, which has a serious impact on people's personal safety and traffic. Similarly, China LED street lights and solar street lights installed on both sides of the road are also facing the typhoon. Risks, and injuries to people or vehicles are more direct and fatal because the street lights are broken. Therefore, how solar street lights and LED street lights can resist typhoons has become an important matter. .
For solar street lights, resistance to typhoons should be done from three aspects: First, the foundation should be buried deeper and installed with buried cages. This is to strengthen the connection between the street lights and the ground to prevent the strong wind from pulling the street lights. Up or blow down. Second, avoid cutting corners and thickening the material of the light pole. In order to save the material of the light pole, the possible risk is that the light pole is broken halfway, because the light pole is too thin and the height of the light pole is high. It is easy to be broken, solar street light poles should be able to withstand at least a level 12 typhoon, and most areas in the north should be able to withstand a level 10 gale. . Third, the reinforcement of the solar panel bracket is very important, because there is a possibility that the solar panel will be blown off directly because of no force, so we must use a material with high hardness. Then the prevention of LED street lights only needs to do the first two steps of the first three steps.